This guide provides quick answers to common questions about the BeMini device, including reporting behavior, battery performance, location accuracy, charging, and device indicators. Use it to troubleshoot issues, understand key device functions, and keep your installation running smoothly.
General Frequently Asked Questions
Question | Answer |
The BeMini device is failing to report, and a full charge has been confirmed. What should I do? | Press and hold the button on the front of the device for 10 seconds, then retest activity and review reporting. |
How does the BeMini report location using GPS? | When the BeMini is within Wi-Fi range, it determines location by detecting the MAC addresses of nearby Wi-Fi access points to assist with positioning. |
What is the Wi-Fi range for location reporting? | For Wi-Fi reporting, 40 meters is typical with standard consumer-grade routers. In some cases, routers may detect the device at 80–120 meters, but this is uncommon. |
At what voltage is the BeMini battery considered drained? | The battery is considered drained at 3.35V. |
What type of USB connector is required for the BeMini? | The BeMini uses a micro-USB connector. |
What does the Battery Capacity value represent? | Battery Capacity indicates the remaining battery charge as a percentage (for example, 61% means 61% charge remaining). |
When should the device be revisited for recharge or replacement? | We recommend revisiting the installation when battery life drops below 30%. The Low Internal Battery alert triggers at this same threshold. |
Can the device be turned on or off? | No. As long as the device has an active charge, it will continue to operate according to its configuration profile. |
Is there a recommended charging station for charging multiple BeMini devices simultaneously? | Yes. We generally recommend using charging stations that offer intelligent protection to help prevent devices from being unintentionally damaged during charging—for example, a multi-port USB charging station with intelligent protection (such as a 40-port model available from major online retailers). |
How many report points are supported on a full charge? | The BeMini supports approximately 500 report points on a full charge. |
How long does it take to fully recharge the device? | A full recharge from complete depletion takes approximately 3–4 hours. |
What do the lights on the device indicate? | Charging: The light blinks while connected to a charger and stays solid once fully charged. It turns off after the device is unplugged.
Updating: The light briefly blinks during updates or when the button is pressed to trigger an update. |
Is the BeMini IP rated? | Yes, the device is rated IP67 for dust and water resistance. |
BeMini as a Bluetooth (BLE) Beacon
Question | Answer |
How does the BeMini report its location via Bluetooth? | The BeMini advertises its location using a BLE signal. When near a gateway device (BeSol or BeTen), that device can relay the signal to the server. The BeMini's location will reflect the gateway's location when viewed on a map or report, ensuring the asset is shown in the general area. |
What is the BLE advertising broadcast interval of the BeMini? | The BeMini advertises at 1,250 ms intervals. |