GPS Insight Platform

All dashcams are shipped fully activated and are mounted directly to the windshield.

The best location for the dashcam is below the rear view mirror in a centered position.

It is important to spend time considering exactly where to mount the dascham.

Additionally, be sure to note down either the IMEI or Serial Number of your dashcam as you'll need this in the Configuring and Assigning step.

- All dashcams are shipped fully activated and are mounted directly to the windshield.
- The best location for the dashcam is below the rear view mirror in a centered position.
- It is important to spend time considering exactly where to mount the dascham.
- Additionally, be sure to note down either the IMEI or Serial Number of your dashcam as you'll need this in the Configuring and Assigning step.

To complete the installation of your dashcam you will need the following items (all of which come standard in any SmarWitnes KP2 Dashcam order):

F. Dashcam Power Cable (either OBDII connector, JBUS connector or bare wire adapter for hardwiring)

- A. SmartWitness KP2 Dashcam
- B. 3M Adhesive Tape
- C. Alcohol Pads
- D. Adhesive Cable Clips
- E. Torque Wrench
- F. Dashcam Power Cable (either OBDII connector, JBUS connector or bare wire adapter for hardwiring)

In addition to the above, you may also need some of the following additional/optional cables depending on your vehicle and how you're choosing to install the dashcam:

- OBD Bracket/Bypass Y Cable
- OBD Basic Y Cable ​ ​

Use the alcohol wipes to clean the area you will mount the dashcam. Allow time to dry. To determine compliant device placement, check local regulations.

- Use the alcohol wipes to clean the area you will mount the dashcam. Allow time to dry. To determine compliant device placement, check local regulations.

If not already attached to the dashcam, remove one side of the 3M adhesive tape and attach to the mounting bracket of the dashcam. Press evenly to ensure the mounting bracket’s adhesive is flush against the glass. Hold to window for 30 seconds

- If not already attached to the dashcam, remove one side of the 3M adhesive tape and attach to the mounting bracket of the dashcam. Press evenly to ensure the mounting bracket’s adhesive is flush against the glass. Hold to window for 30 seconds

Remove adhesive and apply cable clips to windshield. Slide the power cable into clips.

- Remove adhesive and apply cable clips to windshield. Slide the power cable into clips.

Tuck cable behind weather stripping, and push stripping in to secure it.

- Tuck cable behind weather stripping, and push stripping in to secure it.

At the end of the power cable (A), connect the terminal to the smaller end of the adapter cable (F).

- At the end of the power cable (A), connect the terminal to the smaller end of the adapter cable (F).

Plug the end of the OBDII adapter cable into your vehicle’s OBDII port.

- Plug the end of the OBDII adapter cable into your vehicle’s OBDII port.

Turn on your vehicle. Check that both blue and green lights remain on after 5 minutes. If not, an error occurred.

- Turn on your vehicle. Check that both blue and green lights remain on after 5 minutes. If not, an error occurred.

KP2-Illustration-6-KP2-Illustration-windshield-dash.png

KP2-Illustration-10-sustained-LED-lights.png

Either once installed or towards the end of the KP2 Installation you should also follow the process for enabling AI features on your SmartWitness Dashcam. To start, download the "SmartWitness KP2 Installer" application and follow the prompts.

Scan the QR Code below or <a href="https://apps.apple.com/app/kp2-installer/id1610816200" rel="nofollow noopener noreferrer" target="_blank">click on this link</a> to go to the

and download the SmartWitness KP2 Installer iOS.

- Scan the QR Code below or <a href="https://apps.apple.com/app/kp2-installer/id1610816200" rel="nofollow noopener noreferrer" target="_blank">click on this link</a> to go to the
 Apple App Store
 and download the SmartWitness KP2 Installer iOS.

Scan the QR Code below or <a href="https://play.google.com/store/apps/details?id=com.smartwitness.kp2installer" rel="nofollow noopener noreferrer" target="_blank">click on this link</a> to to go the Google Play Store and download the SmartWitness KP2 Installer for Android.

- Scan the QR Code below or <a href="https://play.google.com/store/apps/details?id=com.smartwitness.kp2installer" rel="nofollow noopener noreferrer" target="_blank">click on this link</a> to to go the Google Play Store and download the SmartWitness KP2 Installer for Android.

SmartWitness KP2 Installation

No tickets or conversations found

Try selecting a different creation date range.

Tickets and conversations you've started through the messenger will appear here.

No tickets or conversations created by you

Try using different keywords or checking for typos.

Try selecting a different update date range.

Find answers and get help from Intercom Support and Community Experts

Conversations you've started through the messenger will appear here.

No conversations created by you

No conversations found

AI title

Title

This site employs cookies and other technologies that we and our third party vendors use to monitor and record personal information about you and your interactions with the site (including content viewed, cursor movements, screen recordings, and chat contents) for the purposes described in our Cookie Policy. By continuing to visit our site, you agree to our {websiteTermsLink}, {privacyPolicyLink} and {cookiePolicyLink}.

This site uses cookies and similar technologies ("cookies") as strictly necessary for site operation. We and our partners also would like to set additional cookies to enable site performance analytics, functionality, advertising and social media features. See our {cookiePolicyLink} for details. You can change your cookie preferences in our Cookie Settings.

We use cookies to make our site work and also for analytics and advertising purposes. You can enable or disable optional cookies as desired. See our {cookiePolicyLink} for more details.

Advertising cookies are set by our advertising partners to collect information about your use of the site, our communications, and other online services over time and with different browsers and devices. They use this information to show you ads online that they think will interest you and measure the ads' performance. Social media cookies are set by social media platforms to enable you to share content on those platforms, and are capable of tracking information about your activity across other online services for use as described in their privacy policies.

These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

These cookies are necessary for the website to function and cannot be switched off in our systems.

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site.

You have the right to opt out of the sale of your personal information. See our {cookiePolicyLink} for more details about how we use your data.

Your Privacy Choices

We use cookies to enhance your experience. You can customize your cookie preferences below. See our {cookiePolicyLink} for more details.

Cookie Settings

Empty Help Center

Uh oh. That page doesn’t exist.

Home

Search results

Disappointed

Neutral

Smiley

Thinking...

Searching through sources...

Analyzing...

Tickets submitted through the messenger or by a support agent in your conversation will appear here.

No tickets created by you

No tickets found

Conversations and tickets in {topic}

Conversations and tickets in {topic} // {subtopic}

Volume, creators and topics for your company.

Insights

Top creators

AI topics

Track the progress of all tickets and conversations related to your company.

Customer Portal.

Track the progress of all tickets related to your company.

Tickets portal.

{assigneeName} needs more information from you

Tickets

No access to tickets portal

Search

Skip the search. Describe what you’re trying to do and get a grounded answer.

Browse articles and guides in this topic.

Create your workspace and invite the people you work with.

Set up your account

Build your first workflow and watch it run end to end.

Ship something

Connect the tools your team already uses to bring data in.

Connect your stack

A quick lap of the product so you know where everything lives.

{appName} in 60 seconds

This prototype demo is aware that you are reading “{title}”. It can point you back to the current article, but a production article-aware Fin contract is still follow-up work.

Prototype article-aware answer

Because you already asked about invitations, this prototype demo can add the follow-up: use the role selector before sending each invite to limit access to the teammate responsibilities.

Prototype role-limiting follow-up

This prototype demo suggests starting with your workspace profile, inviting the team members who need access, and then connecting the integrations you use.

Prototype getting-started answer

In this prototype demo, integrations are configured from workspace settings. Choose the integration, connect the account, and review the enabled permissions.

Prototype integrations answer

In this prototype demo, invite teammates from workspace settings, then choose the access each teammate needs before sending the invitation.

Prototype invite-team answer

This prototype demo does not have a scripted answer for that question yet. Try asking how to invite your team or open a source article. No production Fin API was called.

Prototype answer unavailable

I’ve got this page open. Ask me anything about it and I’ll answer from the docs.

SmartWitness KP2 Installation

Required Hardware

Installation

Configuring