Note: The TT8900 is EOL: Discontinued as of May 2026.
General Operation
There are three main 'states' that a Xirgocam can be in when installed in a vehicle.
Active Mode
Xirgocam is actively recording footage
Requests for media or automatic events should be fulfilled in a timely manner.
Guard Mode
Xirgocam is not actively recording footage but will 'wake' (switch to Active Mode from Guard Mode) when motion is detected.
This generally includes things like opening the car door, a bump on the vehicle window, etc.
Device enters guard mode after a period of 6 minutes of no motion being detected.
Green light on the front of the dashcam pulses while in guard mode
Cellular connectivity may be limited, but most dashcams in Guard Mode will respond as 'Online' via the web portal and should fulfill requests.
Low Power Mode
To mitigate the amount of power draw from a vehicle's battery, Xirgocams can also enter this state. This occurs when:
The device has been in Guard Mode for a period of 72 hours.
The detected battery voltage is below 12.0V for more than 8 minutes
In this state, the dashcam is essentially off
Dashcam will not respond online from the web portal, will not wake from guard mode, and has no cellular connection.
Once the vehicle is started, the Xirgocam will boot up and enter Active Mode.
AI Configuration
To enable AI functionality on Xirgocam hardware, please complete the following steps.
Ensure your dashcam is securely mounted in as centralized a position as possible in the vehicle.
Take note of the height at which the dashcam is installed in the vehicle; this value should be entered under the camera settings page to improve AI event accuracy.
Navigate to the dashcam admin page to start turning on AI features under Camera Settings.
Technical Specifications
Resolution
1080 Road Facing / 720 Driver Facing
Storage
P4 Dashcams - Most units shipped after March 2021
160GB
P1 Dashcams - Most units shipped prior to March 2021
128GB